Note: Basic gun stock color is black. There is an additional charge for color finishes shown.
Full
Aluminum Bedding Rifle Stocks
This beautiful
rifle stock has a straight comb cheek piece. Includes Pachmayr Decelerator recoil pad. This gun stock is available with an aluminum
integral bedding block that is precision- machined for total metal to metal fit.
This virtually eliminates any additional bedding and assures a perfect fit that
will never change.
Varmint
Rifle Stocks
This stock features a precision machined aluminum insert
bedding block for total metal-to-metal fit. Virtually eliminates additional
bedding and assures a perfect fit that will never change. It includes premium
recoil pad and sling studs, and is also available without the aluminum insert
bedding block. The stock features a slight beaver-tail forend although it is not
as wide as the Premier Varmint forend.
Weatherby
Style Rifle Stocks
The traditional Weatherby-style
gun stock is a duplicate of the
factory stock. When ordering a stocks for the .378, .416, or the .460, you must
modify the stock to accommodate for the double recoil lug system. This stock
comes with the aluminum bedding block . This bedding block is computer designed
and machined out of aircraft quality aluminum.
We offer Varmint stocks, fully adjustable rifle stocks, Carbelite rifle stocks, Medalist stocks and standard hunting rifle stocks. These rifle stocks unless indicated otherwise, are designed to permit the customer to simply remove the barreled action from the original gun stocks and bolt it into the new stock. All stocks allow true "drop-in" installation and are designed to last a lifetime with no maintenance required. Because of variations in manufacturers' original equipment, it may be necessary to remove minimal amounts of material from the magazine area. Most factory barreled actions will bolt into the stock with the barrel free- floating ; however custom contoured barrels may need some fitting which can be accomplished with standard woodworking tools. More information can be found under rifle stock construction.
All of these gunstocks are available in any of the durable finishes listed on the following pages. Additionally, all stocks come with a premium recoil pad and sling swivel studs. A Pachmayr Decelerator recoil pad is standard on some models and optional on others. Glass bedding, though not necessary, is optional, as well as pillar bedding and a full aluminum bedding chassis on the Medalist line of rifle stocks. If you are going to bed your action be sure to follow the bedding material manufactures instructions carefully. The manufacturer will not be responsible for any damage to their gun stocks caused by a customers attempt to remove the action from the stock after the bedding material has set up. Procedures for the proper application of a release agent to the action and other rifle parts prior to their contact with the bedding material that has been applied to the stock must be followed to the letter. If you are not sure how properly bed your gun stock, contact a qualified professional before proceeding.
The weight of these gun stocks vary due to the large variety of models and sizes. Most hunting and varmint models weigh about 2 to 2.25 pounds. Tactical and one piece military models range from 3 to 4.5 pounds. 10/22 models are less than 2 pounds. Two piece models weigh about 2 pounds.
These stocks are reliable over a temperature range of -50?F to + 150?F. All stocks are covered by a limited lifetime warranty.