#5131-__ Browning A-Bolt Hunter, Long Action

Fits Stainless Stalker, Medallion, Gold Medallion and Big Horn Sheep. Does not 

fit  A-Bolt II or BBR

#5111-__* Interarms MK X, Long or Short Action

Fits current model action or short action with magazine area block fits 1988 and older stocks. Stocks with side push button for floorplate require minor inletting.

#5051-__ Mauser 98, Long Action

Fits sporter action with drop down floor plate and tapered barrel without adjustable trigger. Because of multiple origins of manufacture
and variations in actions slight modifications may be required.

#5011__ Remington 700 ADL, Long Action, Blind Magazine

Fits current model and Sportsman 78 action. Will not fit Model 721 or 722 actions.
#5022__ Remington 700 BDL, Short Action With Raised Cheek Piece

Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications.
 #5022-DBM__ Remington 700 BDL, Short Action Det. Mag. With Raised Cheek Piece

Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications.

#5023__ Remington 700 BDL Left Hand Long Action

Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications.

5023-DBM__ Remington 700 BDL Left Hand Long Action Det. Mag.

Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications.

#5024__ Remington 700 BDL,  Left Hand, Short Action

Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications.
#5024-DBM__ Remington 700 BDL,  Left Hand, Short Action Det. Mag.

Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications.

#5261__ Remington 700 Detachable Magazine Box (clip load), Long Action Detachable Magazine
.

#5031__ Ruger M77, Long Action

Fits tang safety model, can be modified to accept up to #3 barrel contour.  

*Note: Made with older molds. Barrel channel rails may be different widths and cannot be returned for that defect.

#5032__ Ruger M77 Short Action

Fits tang safety model, can be modified to accept up to #3 barrel contour.

*Note: Made with older molds. Barrel channel rails may be different widths and cannot be returned for that defect.

#5231__ Ruger M77 MKII L/A

Fits current model, stock can be modified to accept up to #3 barrel contour.

*Note: Made with older molds. Barrel channel rails may be different widths and cannot be returned for that defect.

#5232__ Ruger M77 MKII S/A

Fits current model, stock can be modified to accept up to #3 barrel contour.

*Note: Made with older molds. Barrel channel rails may be different widths and cannot be returned for that defect.

#5233__ Ruger M77 MKII Left Hand L/A

Fits current model, stock can be modified to accept up to #3 barrel contour.

*Note: Made with older molds. Barrel channel rails may be different widths and cannot be returned for that defect.

#5061-__ *Sako A/V L61R, Long Action

Fits standard Sporter, Hunter, Safari, Classic and Deluxe models

#5071-__ Savage, Long Action, Blind Magazine

Fits  long action cal. "three digit models" (such as Model 110, 111, 116 etc.)

with standard contour barrel and top loading internal magazine with 2 action screws, measuring

5 1/8"center to center only.  3 screw actions do not have rear tang hole pre-drilled.

Does not fit short action, three digit models such as .243 cal 110e

#5072-__ Savage, Short Action, Blind Magazine

Fits short action "two digit models" (such as Model 10, 10GY, 11F,

11FC, etc.) with standard contour barrel and top loading internal magazine with action screws 

 measuring 4 1/4" center to center only. Note: Does not fit WSM actions.

#5081-__ *Weatherby Vanguard, S&W 1500 and Mossberg 1500 Long Action

One piece trigger guard and magazine

#5101-__ *Weatherby MK V, Long Action

Fits Japanese and U.S.A. actions with one piece floor plate only, inletting

required for second recoil lug on the barrel in calibers .378 and

above. Modifications required to fit German actions  at an additional $30.00 charge**

#5103__ *Weatherby MK V, Left Hand, Long Action 

Fits Japanese and U.S.A. actions with one piece floor plate only, inletting

required for second recoil lug on the barrel in calibers .378 and

above, modifications required to fit German actions

#5041-__ *Winchester Mod 70 Post-64, Long Action

Fits current models with hinged 2 Piece floor plate, barrel channel with

sight lug requires slight modification, short action with magazine area block

#5241-__ Winchester Mod 70 Post-64, Featherweight, Long Action

Fits current model with hinged 2 Piece floor plate, and trigger guard

#5141-__ *Winchester Mod 70 Pre-64, Long Action

Fits standard barreled action with hinged 2 Piece floor plate and trigger guard. Does not fit Featherweight.
Note: The #5141 stock comes out of the mold with one rail wider than the other. The fit is still okay but cosmetically looks off.

Note: Rifles with one piece floor plate require some filling and possible inletting in floorplate area for proper fit.  

*Barrel channel and magazine box area modifications may be required for magnum calibers and/or heavy barrels.

All Magnum calibers will require embedded steel lug. 

(i.e..264, 7mm .300, .338, .375, .378, .416, .458, .460, and all WSM's & SAUM etc.)

** For Weatherby German style action add an additional $42.50 to the standard stock price

     Long Action is for a cartridge that is 30-06 length or longer, ie: Win. 270, 7MM Mag. 300 Win.Mag. etc.

     Win. WSM's and Rem. SAUM's are Short Action.